Wood Roller Dryer For Veneer-manufacture,factory,supplier from China

Why suggest you to choose Shine biomass burner roller veneer dryer ? 1. The biomass burner, a patented product independently developed by our company, can directly use crushed wood waste as fuel to provide a heat source for the dryer, no need to buy steam boiler or thermal oil again . which is energy-saving and environmentally friendly, and greatly reduces the drying cost. The comprehensive drying cost for one cbm is about $10 lower than thermal oil or steam boiler. 2.

The Brazilian customer bought our 24m single-layer veneer drying equipment with our patented biomass burner,  the customer feedback that our equipment is very good, it can  achieve the expected output and  dried veneer moisture content is even, flat, no wrinkles.We have a professional R&D team that can design different models according to customer’s special requirement.

Why lumber can produce stem shrink, crack, bend be out of shape, mildew to wait for a phenomenon, it is to contain a lot of moisture as a result of lumber, go into the water branch in specific environment evaporates continuously, the quality that the nature of moisture evaporates can endanger lumber product seriously, appear a variety of problems.Therefore, wood needs to be forcibly dryer treated before it is made into various wood products.

The veneer dryer needs to pay attention to some problems when drying wood. Before use, the heating fan should be started first, and when the drying temperature is reached, the speed regulating motor should be started. The veneer should enter from the feeding port longitudinally, the feeding should be straight, the veneer and the transmission roller should be connected at a 90-degree angle, and the veneer should be cut neatly before drying.

Xishuangbanna customers ordered two set  58 meters 4.5 meters wide double layer  roller veneer dryer ,which use thermal oil as fuel . They two veneer dryers were installed well and put into use successfully . they will dry the rubber veneers and welcome to visit and give suggestion. 

Recently, the 2deck 48-meter veneer dryer purchased by our Thai customer has been installed and put into use. The motor of this new veneer dryer has been replaced with a 5.5KW one. The whole set of equipment is very energy-saving, greatly reducing the drying cost, and the output is more than 80 square meters a day. Using the patented biomass burner as the heat source, it can directly burn all kinds of waste wood, and the dried boards are flat and wrinkle-free.

As the name suggests, wood drying equipment is used for wood drying. There are many types of similar equipment on the market now. Many manufacturers do not have a dedicated design team. Well, there is a big gap between the drying effect and the original promise. Therefore, when we choose, we must pay more attention to the comprehensive strength of the enterprise, and also consider what kind of product we need to buy. This is very important.

Since its establishment in 1999, Shine Machinery has always adhered to the development concept of continuous innovation and provided excellent solutions for customers.At present, our largest roller veneer dryer has been installed and runs smoothly in South Africa, capable of drying approximately 230 cubic meters of veneer in 24 hours.Recently, our 6-layer and 6-meter wide veneer dryer has also unveiled its mysterious veil. Currently, research and development are progressing smoothly, with an expected hourly output of around 15-18 cubic meters, which will further enhance the user experience.

Recently, our foreign customer's four-layer veneer dryer has been installed and tested. It was guided and installed by our engineer. After the test machine has been running normally for a period of time, our engineer will return to our factory. The veneer dried by the dryer has a very good effect, both secondary and tertiary boards can be used. The biomass burner is used to heat and directly burn various waste wood, which saves drying costs. We are very welcome to visit the site or visit our factory.

The second set of veneer dryer purchased by the zimbabwean customer has now been installed and successfully run. We recommend suitable veneer dryer for the customer according to the customer's output, heating with biomass burner and directly burning all kinds of waste wood. the dried veneer is flat without wrinkles.