Humid Veneer Drying-manufacture,factory,supplier from China

The Vietnamese customer's 40-meter single-layer veneer drying equipment is being installed. Due to the impact of the epidemic, the engineer cannot go to the site to install it. We will guide the customer to complete the installation smoothly through the video, and thank the customer for their recognition of our products.

Wood veneer needs to be dried before it is used, so that wood is not prone to problems in the future use, and the plate after drying is easier to save.

As the main equipment for drying wood, the veneer dryer's drying speed will directly affect the quality and efficiency of drying veneers. Therefore, we must fully understand the factors that affect the drying speed in order to make it better. play a role. Next, let's get to know each other together.One of the main factors affecting the drying speed of the veneer dryer is the temperature. The increase in temperature can accelerate the evaporation of moisture on the surface of the wood, so the drying of the wood will also be accelerated.

As the main equipment for drying wood, the veneer dryer's drying speed will directly affect the quality and efficiency of drying veneers. Therefore, we must fully understand the factors that affect the drying speed in order to make it better. play a role. Next, let's get to know each other together.One of the main factors affecting the drying speed of the veneer dryer is the temperature. The increase in temperature can accelerate the evaporation of moisture on the surface of the wood, so the drying of the wood will also be accelerated.

Recently, our customers in Guangdong came to our factory for a visit and inspection. It was our business who accompanied the customers and gave a detailed explanation of our veneer dryer and customers. After seeing the customers, they recognized our equipment, especially It is our biomass burner. We also answer some questions raised by customers one by one, and now we are making solutions for customers according to their needs. We welcome customers to visit our factory.

The veneer dryer needs to pay attention to some problems when drying wood. Before use, the heating fan should be started first, and when the drying temperature is reached, the speed regulating motor should be started. The veneer should enter from the feeding port longitudinally, the feeding should be straight, the veneer and the transmission roller should be connected at a 90-degree angle, and the veneer should be cut neatly before drying.

We have extensive experience in drying rubber wood veneer. Our dryer has the advantages of low card rate and easy maintenance of equipment.Reasonable roller diameter and roller spacing not only ensure that hot air can be evenly distributed on both sides of the veneer, but also greatly reduce the occurrence of veneer jamming. At the same time, the ellipticity of the roller does not exceed 100 um, and the straightness does not exceed 500 um, which also reduces the occurrence of jamming.

Since its establishment in 1999, Shine Machinery has always adhered to the development concept of continuous innovation and provided excellent solutions for customers.At present, our largest roller veneer dryer has been installed and runs smoothly in South Africa, capable of drying approximately 230 cubic meters of veneer in 24 hours.Recently, our 6-layer and 6-meter wide veneer dryer has also unveiled its mysterious veil. Currently, research and development are progressing smoothly, with an expected hourly output of around 15-18 cubic meters, which will further enhance the user experience.

Why lumber can produce stem shrink, crack, bend be out of shape, mildew to wait for a phenomenon, it is to contain a lot of moisture as a result of lumber, go into the water branch in specific environment evaporates continuously, the quality that the nature of moisture evaporates can endanger lumber product seriously, appear a variety of problems.Therefore, wood needs to be forcibly dryer treated before it is made into various wood products.

The characteristics of the veneer dryer are more obvious, mainly in several aspects:1. the drying speed is fast, the drying quality is good, and the drying defects are few. When the wood veneer is heated at high frequency, the temperature is uniform, and if the drying process is well controlled, the veneer can be dried without internal cracks, surface cracks and end cracks, so that there will be no drying of the veneer losses in the process.2.