Biomass Veneer Roller Dryer Feeder-manufacture,factory,supplier from China

Why suggest you to choose Shine biomass burner roller veneer dryer ? 1. The biomass burner, a patented product independently developed by our company, can directly use crushed wood waste as fuel to provide a heat source for the dryer, no need to buy steam boiler or thermal oil again . which is energy-saving and environmentally friendly, and greatly reduces the drying cost. The comprehensive drying cost for one cbm is about $10 lower than thermal oil or steam boiler. 2.

The 40 meters double layer biomass veneer dryer purchased by the Indonesian customer has been delivered, together with our biomass burner. The biomass burner is our patented product, which can directly burn waste wood, greatly saving the cost.

The Brazilian customer bought our 24m single-layer veneer drying equipment with our patented biomass burner,  the customer feedback that our equipment is very good, it can  achieve the expected output and  dried veneer moisture content is even, flat, no wrinkles.We have a professional R&D team that can design different models according to customer’s special requirement.

Our four-layer veneer dryer purchased by Myanmar customers is used to dry oak and received good feedback from the customer.It is used together with the biomass burner.The biomass burner acts as a heat source to provide high temperature for the dryer to ensure sufficient heat to effectively impact the wet veneer.At the same time,the bark of the peeling machine and the waste veneer of the rotary cutting machine are burned directly as fuel,which solves the problem of waste accumulation in the veneer plywood factory.

Xishuangbanna customers ordered two set  58 meters 4.5 meters wide double layer  roller veneer dryer ,which use thermal oil as fuel . They two veneer dryers were installed well and put into use successfully . they will dry the rubber veneers and welcome to visit and give suggestion. 

Since its establishment in 1999, Shine Machinery has always adhered to the development concept of continuous innovation and provided excellent solutions for customers.At present, our largest roller veneer dryer has been installed and runs smoothly in South Africa, capable of drying approximately 230 cubic meters of veneer in 24 hours.Recently, our 6-layer and 6-meter wide veneer dryer has also unveiled its mysterious veil. Currently, research and development are progressing smoothly, with an expected hourly output of around 15-18 cubic meters, which will further enhance the user experience.

Recently, our Six-deck Roller Veneer Dryer carryed on a test run, and Peruvian customer visited the testing site. At present, the R&D work is progressing smoothly, and the new generation of automatic veneer loading machine meets expectations. The new dryer will undergo a fully automated upgrade to reduce labor costs while ensuring efficient and stable drying. It is expected to produce around 15-18 cubic meters per hour.

Myanmar factory customer four layer veneer dryer and biomass burner matching use, The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing. and biomass burner can directly burn a variety of waste wood, greatly saving the drying cost.

The 56m 2 deck roller veneer dryer  is being installted now in Zimbabwe, this is the second set veneer drying machine from our South Africa client, who will install the third one in the next year . Shine biomass burner can use the crushed waste wood as fuel directly , which can save the drying cost for the user .  the client is very satisfied with the operation of our veneer dryers .welcome to visit the veneer dryer site to consult  . 

The 58-meter-4.5-meter-wide double-deck roller veneer dryer purchased by a customer in Xishuangbanna is heated by heat-conducting oil,with high output, and the moisture content of the dried veneer is uniform.The customer has now put it into use.Very satisfied,our equipment has been affirmed by many domestic and foreign customers,we must work harder to do better,and welcome customers to visit our factory at any time.